/*]]>*/
News
Company
Products
Product Overview
Product Search
Moisture-proof
Moisture-proof batten
Compact luminaires
Surface-mounted
RLS
ALS
AOT
Recessed
Special luminaires
Diffusers
Trunking system
Applications
Competence
Service
Quality management
Contact
AOT
CE :: The CE-identification is performed by the manufacturer. The manufacturer, at the manufacturers own responsibility, hereby confirms conformity with the respective EC or EU directives. Conformity in accordance with the Low-voltage Directive and the EMV Directive (interference immunity, emitted interference) is the precondition for the CE-identification for our products.
ENEC :: The ENEC-Symbol is the European safety symbol for luminaires. The test regulations are determined by the European standard 60 598. The ENEC-Symbol is issued in combination with the identification number of a European test center (VDE = 10) This documents that the luminaires have been built and tested in "conformity with the standards" as per the Low-voltage Directive 73/23 EEC.
VDE :: Reiss standard luminaires are VDE-approved. They have the VDE-approval and are continuously tested in strictly stipulated quality controls. These controls are supervised by the VDE.
F :: All luminaires meet the F-conditions. In the event of faulty luminaire the fastening surfaces will not be hotter than 180°C. They may be mounted on inflammable building materials as described in DIN 4102 ignition point of at least 200°C (e.g. wood). Observe the installation instructions in order to avoid incorrect installation.
IP 50 :: dustproof (ingression of dust not impossible) but unprotected from moisture.
AOT 1/36 W with TWO
AOT 2/36 W with TWP
AOT 1/36 W with RWO
AOT 2/36 W with RWP

Technical description

Surface-mounted luminaire with diffuser: Body made of deep-drawn, white painted sheet steel. Highly effective, glued-in polyurethane (PU) profile gasket. Practical fastening mechanism using plastic twist lock. Diffuser optionally made of thermoformed or injection-moulded UV-resistant polymethylmethacrylate (PMMA). With automatic terminal. Halogen-free wiring.

Options

  • Emergency lighting
  • Dimmable (analogue, DALI or DSI)
  • Multiwatt versions
  • CorridorFUNCTION
  • For areas exposed to fire hazard, protection type D (FF)
  • 2-lamp body fitted with 1 lamp
  • T5 versions
  • Aluminium reflector

Diffusers

PM diffuser made of UV-resistant thermoformed polymethylmethacrylate (PMMA). This material boasts high translucency, surface hardness, resistance to weathering and ageing, and outstanding resistance to chemical influences. The RWO and TWO diffuser models are made of opal PMMA, the prismatic EP, RWP and TWP models are made of clear PMMA.

Prismatic

EP – Straight outline with photometrically calculated prisms
TWP – Trapezoidal design
RWP – Angular design
AKP – Square shape

Opal

TWO – Trapezoidal design
RWO – Angular design
AKO – Square shape

Mounting method

  • Direct to ceiling or wall
AOT 2/36 W with EP
AOT 2/36W RWP
η 75%
— C0-C180
— C90-C270
AOT 2/36W TWP
η 78%
— C0-C180
— C90-C270
AOT 1/36W TWO
η 77%
— C0-C180
— C90-C270
AOT 1/36W RWO
η 76%
— C0-C180
— C90-C270
AOT 2/36W EP
η 74%
— C0-C180
— C90-C270