/*]]>*/
News
Company
Products
Product Overview
Product Search
Moisture-proof
FAD
FAD-C -30°C
FAD-H +60°C
FAC
FAC-T
FAC-C -40°C
FA
FA-T
Moisture-proof batten
Compact luminaires
Surface-mounted
Recessed
Special luminaires
Diffusers
Trunking system
Applications
Competence
Service
Quality management
Contact
FAD
CE :: The CE-identification is performed by the manufacturer. The manufacturer, at the manufacturers own responsibility, hereby confirms conformity with the respective EC or EU directives. Conformity in accordance with the Low-voltage Directive and the EMV Directive (interference immunity, emitted interference) is the precondition for the CE-identification for our products.
ENEC :: The ENEC-Symbol is the European safety symbol for luminaires. The test regulations are determined by the European standard 60 598. The ENEC-Symbol is issued in combination with the identification number of a European test center (VDE = 10) This documents that the luminaires have been built and tested in "conformity with the standards" as per the Low-voltage Directive 73/23 EEC.
VDE :: Reiss standard luminaires are VDE-approved. They have the VDE-approval and are continuously tested in strictly stipulated quality controls. These controls are supervised by the VDE.
F :: All luminaires meet the F-conditions. In the event of faulty luminaire the fastening surfaces will not be hotter than 180°C. They may be mounted on inflammable building materials as described in DIN 4102 ignition point of at least 200°C (e.g. wood). Observe the installation instructions in order to avoid incorrect installation.
IP 65 :: dust-tight (no ingression of dust) and protected from jet water (from all directions).
IP 66 :: dust-tight (no ingression of dust) and protected from rough sea.
IP 67 :: dust-tight (no ingression of dust) and protected from immersion (with details about pressure and time).

Advice

By clicking on the item numbers listed in the below mentioned tables, you will get a photometric data sheet in PDF format for the respective luminaire type.

T26 (T8) VVG induktiv / low loss ballast
TypAbdeckungAbmessungen*Gewicht
TypeDiffuserDimensions*Weight
PMPCLBHDKg
FAD 1/18W70 400 10070 400 7136731111104501.6
FAD 1/36W70 400 10170 400 71412831111106602.4
FAD 1/58W70 400 10270 400 71515831111109003.2
FAD 2/18W70 400 10370 400 7166731681144502.0
FAD 2/36W70 400 10470 400 71712831681146603.7
FAD 2/58W70 400 10570 400 71815831681149005.1
* mm
T26 (T8) EVG / electronic ballast / D (FF)
TypAbdeckungAbmessungen*Gewicht
TypeDiffuserDimensions*Weight
PMPCLBHDKg
FAD 1/18W70 400 10670 400 7196731111104501.3
FAD 1/36W70 400 10770 400 72012831111106602.1
FAD 1/58W70 400 10870 400 72115831111109002.5
FAD 2/18W70 400 10970 400 7226731681144501.7
FAD 2/36W70 400 11070 400 72312831681146602.9
FAD 2/58W70 400 11170 400 72415831681149003.4
* mm
T16 (T5) EVG / electronic ballast / D (FF)
TypAbdeckungAbmessungen*Gewicht
TypeDiffuserDimensions*Weight
PMPCLBHDKg
FAD 1/14W70 400 11270 400 1266731111104501.3
FAD 1/24W70 400 11370 400 1276731111104501.3
FAD 1/28W70 400 11470 400 12812831111106602.1
FAD 1/54W70 400 11570 400 12912831111106602.1
FAD 1/35W70 400 11670 400 13015831111109002.5
FAD 1/49W70 400 11770 400 13115831111109002.5
FAD 1/80W70 400 11870 400 13215831111109002.5
FAD 2/14W70 400 11970 400 1336731681144501.7
FAD 2/24W70 400 12070 400 1346731681144501.7
FAD 2/28W70 400 12170 400 13512831681146602.9
FAD 2/54W70 400 12270 400 13612831681146602.9
FAD 2/35W70 400 12370 400 13715831681149003.4
FAD 2/49W70 400 12470 400 13815831681149003.4
FAD 2/80W42 179 93942 179 94015831681149003.4
* mm