/*]]>*/
News
Company
Products
Product Overview
Product Search
Moisture-proof
FAD
FAD-C -30°C
FAD-H +60°C
FAC
FAC-T
FAC-C -40°C
FA
FA-T
Moisture-proof batten
Compact luminaires
Surface-mounted
Recessed
Special luminaires
Diffusers
Trunking system
Applications
Competence
Service
Quality management
Contact
FAD
CE :: The CE-identification is performed by the manufacturer. The manufacturer, at the manufacturers own responsibility, hereby confirms conformity with the respective EC or EU directives. Conformity in accordance with the Low-voltage Directive and the EMV Directive (interference immunity, emitted interference) is the precondition for the CE-identification for our products.
ENEC :: The ENEC-Symbol is the European safety symbol for luminaires. The test regulations are determined by the European standard 60 598. The ENEC-Symbol is issued in combination with the identification number of a European test center (VDE = 10) This documents that the luminaires have been built and tested in "conformity with the standards" as per the Low-voltage Directive 73/23 EEC.
VDE :: Reiss standard luminaires are VDE-approved. They have the VDE-approval and are continuously tested in strictly stipulated quality controls. These controls are supervised by the VDE.
F :: All luminaires meet the F-conditions. In the event of faulty luminaire the fastening surfaces will not be hotter than 180°C. They may be mounted on inflammable building materials as described in DIN 4102 ignition point of at least 200°C (e.g. wood). Observe the installation instructions in order to avoid incorrect installation.
IP 65 :: dust-tight (no ingression of dust) and protected from jet water (from all directions).
IP 66 :: dust-tight (no ingression of dust) and protected from rough sea.
IP 67 :: dust-tight (no ingression of dust) and protected from immersion (with details about pressure and time).
FAD 1/36W PM
FAD 2/36W PC
FAD 1/36W PC
η 86%
— C0-C180
— C90-C270
FAD 2/36W PC
η 64%
— C0-C180
— C90-C270

Technical description

Moisture-proof luminaire with diffuser: Body made of hardly flammable, glass fibre-reinforced polyester (GRP). Non-ageing polyurethane foam gasket. White sheet steel reflector. Captive, highly resistant catches made of polyamide (PA), or special steel (Inox) catches. Diffuser made of UV-resistant thermoformed polymethylmethacrylate (PMMA), or injection-moulded impact-resistant polycarbonate (PC). With automatic terminal. Halogen-free wiring.

Special

 Options

  • Emergency lighting
  • Dimmable (analogue, DALI or DSI)
  • Multiwatt versions
  • HF motion sensor  >> more on sensor technology
  • CorridorFUNCTION  >> more info
  • For areas exposed to fire hazard,protection type D (FF)
  • Protection class II
  • Strain relief
  • 2-lamp body fitted with 1 lamp
  • Diffuser PMMA clear
  • Alumimium reflector

Diffusers

PM diffuser made of UV-resistant thermoformed polymethylmethacrylate (PMMA), with pearl structure. This diffuser boasts high translucency, surface hardness, resistance to weathering and ageing, and outstanding resistance to chemical influences.

PC diffuser made of highly transparent, UV-stabilized polycarbonate (PC) with internal longitudinal prisms and etched surface structure. This diffuser, produced according to the thermal injection-moulding method, is characterised by outstanding impact resistance and dimensional stability.

Mounting method

  • Direct to ceiling or wall (vertical and horizontal)
  • With clip for ceiling installation
  • Pendant suspension
  • RTS trunking rail

» Only for indoor installations or protected outside areas.