FAD LED
CE :: The CE-identification is performed by the manufacturer. The manufacturer, at the manufacturers own responsibility, hereby confirms conformity with the respective EC or EU directives. Conformity in accordance with the Low-voltage Directive and the EMV Directive (interference immunity, emitted interference) is the precondition for the CE-identification for our products.
D :: New EN-test mark 'D' replaces the national FF-symbol.
Protection class I :: Luminaires of protection class I: The luminaire is designed for connection to a rotective conductor.Protection class I is not identified by a symbol. The symbol indicating the protective earth is often used. Unless specified otherwise, all luminaires by REISS at least comply with protection class I.
IP 67 :: dust-tight (no ingression of dust) and protected from immersion (with details about pressure and time).
IP 66 :: dust-tight (no ingression of dust) and protected from strong jet water.
IP 65 :: dust-tight (no ingression of dust) and protected from jet water (from all directions).
FAD LED
FAD LED 1/41W PM | η 100%
— C0-C180
— C90-C270
FAD LED 1/41W PC | η 100%
— C0-C180
— C90-C270

Technical description

Moisture-proof diffuser luminaire LED: Body made of hardly flammable, glass fibre-reinforced polyester (GRP). Non-ageing polyurethane foam gasket (PU). LED optical system with ESD protection, suspendable and clip-fastenable mounted on white sheet steel reflector. Captive, highly resistant, articulated catches made of polyamide (PA), or special steel catches (Inox). Diffuser made of polycarbonate (PC) with internal longitudinal prisms or polymethylmethacrylate (PMMA) with pearl structure or as clear version. With automatic terminal. Completely halogen-free luminaire. IFS / BRC approved.

Suitable for ambient temperature:

  •  -25°C to +40°C
  •  -25°C to +30°C (for 51 Watt version)

 Special

  • Colour rendering index: Ra > 80
  • LED service life 50,000 h 90 % luminous flux at +25°C

Options

Mounting method

Approved for indoor use or use in outdoor areas protected by a roof (see installation instructions).

  • Direct to ceiling or wall (vertical and horizontal)
  • With clip for ceiling installation
  • Pendant suspension
  • RTS trunking rail

Diffusers

Diffuser made of highly transparent, UV-stabilised polycarbonate (PC) with internal longitudinal prisms and etched surface structure. This diffuser is characterised by outstanding impact resistance and dimensional stability.

Diffuser made of UV-resistant polymethylmethacrylate (PMMA), with pearl structure or as clear version. This diffuser boasts high translucency, surface hardness, resistance to weathering and ageing, and outstanding resistance to chemical influences.