FAD-H +60°C
CE :: The CE-identification is performed by the manufacturer. The manufacturer, at the manufacturers own responsibility, hereby confirms conformity with the respective EC or EU directives. Conformity in accordance with the Low-voltage Directive and the EMV Directive (interference immunity, emitted interference) is the precondition for the CE-identification for our products.
D :: New EN-test mark 'D' replaces the national FF-symbol.
Protection class I :: Luminaires of protection class I: The luminaire is designed for connection to a rotective conductor.Protection class I is not identified by a symbol. The symbol indicating the protective earth is often used. Unless specified otherwise, all luminaires by REISS at least comply with protection class I.
IP 67 :: dust-tight (no ingression of dust) and protected from immersion (with details about pressure and time).
IP 66 :: dust-tight (no ingression of dust) and protected from strong jet water.
IP 65 :: dust-tight (no ingression of dust) and protected from jet water (from all directions).
FAD-H +60°C 1/36W PM
FAD-H +60°C 1/36W PM | η 86%
— C0-C180
— C90-C270

Technical description

Moisture-proof diffuser luminaire: Body made of hardly flammable, glass fibre-reinforced polyester (GRP). Non-ageing polyurethane foam gasket (PU). Standard reflector made of galvanised sheet steel, coated with white polyester lacquer for optimum rust protection. Captive, highly resistant, articulated catches made of polyamide (PA). Industrial electronic ballast. Diffuser made of polymethylmethacrylate (PMMA) with pearl structure. With automatic terminal. Completely halogen-free luminaire. IFS / BRC approved.

Suitable for ambient temperature:

  • -20°C to +60°C (broad body)
  • -20°C to +55°C (narrow body) 


  • Emgergency lighting for central battery
  • Screwed cable gland M20
  • Diffuser PMMA clear
  • Alumimium reflector

Mounting method

Approved for indoor use or use in outdoor areas protected by a roof (see installation instructions).

  • Direct to ceiling or wall (vertical and horizontal)
  • With clip for ceiling installation
  • Pendant suspension
  • RTS trunking rail


Diffuser made of UV-resistant polymethylmethacrylate (PMMA)), with pearl structure. This diffuser boasts high translucency, surface hardness, resistance to weathering and ageing, and outstanding resistance to chemical influences.

Please note:

The use of through-wiring will slightly increase the luminaire’s own thermal output.