FAD-C -30°C
CE :: The CE-identification is performed by the manufacturer. The manufacturer, at the manufacturers own responsibility, hereby confirms conformity with the respective EC or EU directives. Conformity in accordance with the Low-voltage Directive and the EMV Directive (interference immunity, emitted interference) is the precondition for the CE-identification for our products.
D :: New EN-test mark 'D' replaces the national FF-symbol.
Protection class I :: Luminaires of protection class I: The luminaire is designed for connection to a rotective conductor.Protection class I is not identified by a symbol. The symbol indicating the protective earth is often used. Unless specified otherwise, all luminaires by REISS at least comply with protection class I.
IP 67 :: dust-tight (no ingression of dust) and protected from immersion (with details about pressure and time).
IP 66 :: dust-tight (no ingression of dust) and protected from strong jet water.
IP 65 :: dust-tight (no ingression of dust) and protected from jet water (from all directions).
FAD-C -30°C 2/36W PC
FAD-C -30°C 2/36W PC | η 60%
— C0-C180
— C90-C270

Technical description

Moisture-proof diffuser luminaire: Body made of hardly flammable, glass fibre-reinforced polyester (GRP). Non-ageing polyurethane foam gasket (PU). Standard reflector made of galvanised sheet steel, coated with white polyester lacquer for optimum rust protection. With a special configuration for low temperatures down to -30°C (REISS thermo tube and industrial electronic ballast). Captive, articulated special steel catches (Inox). Diffuser made of Polycarbonate (PC) with internal longitudinal prisms. With automatic terminal. Completely halogen-free luminaire. IFS / BRC approved.

Suitable for ambient temperature: 

  • -30°C to +35°C  


  • Emergency lighting for central battery
  • Screwed cable gland M20

Mounting method

Approved for indoor use or use in outdoor areas protected by a roof (see installation instructions).

  • Direct to ceiling or wall (vertical and horizontal)
  • With clip for ceiling installation
  • Pendant suspension
  • RTS trunking rail


Diffuser made of highly transparent, UV-stabilised polycarbonate (PC) with internal longitudinal prisms and etched surface structure. This diffuser is characterised by outstanding impact resistance and dimensional stability.