/*]]>*/
News
Company
Products
Product Overview
Product Search
Moisture-proof
FAD
FAD-C -30°C
FAD-H +60°C
FAC
FAC-T
FAC-C -40°C
FA
FA-T
Moisture-proof batten
Compact luminaires
Surface-mounted
Recessed
Special luminaires
Diffusers
Trunking system
Applications
Competence
Service
Quality management
Contact
FA
CE :: The CE-identification is performed by the manufacturer. The manufacturer, at the manufacturers own responsibility, hereby confirms conformity with the respective EC or EU directives. Conformity in accordance with the Low-voltage Directive and the EMV Directive (interference immunity, emitted interference) is the precondition for the CE-identification for our products.
ENEC :: The ENEC-Symbol is the European safety symbol for luminaires. The test regulations are determined by the European standard 60 598. The ENEC-Symbol is issued in combination with the identification number of a European test center (VDE = 10) This documents that the luminaires have been built and tested in "conformity with the standards" as per the Low-voltage Directive 73/23 EEC.
VDE :: Reiss standard luminaires are VDE-approved. They have the VDE-approval and are continuously tested in strictly stipulated quality controls. These controls are supervised by the VDE.
F :: All luminaires meet the F-conditions. In the event of faulty luminaire the fastening surfaces will not be hotter than 180°C. They may be mounted on inflammable building materials as described in DIN 4102 ignition point of at least 200°C (e.g. wood). Observe the installation instructions in order to avoid incorrect installation.
IP 65 :: dust-tight (no ingression of dust) and protected from jet water (from all directions).
IP 67 :: dust-tight (no ingression of dust) and protected from immersion (with details about pressure and time).

Advice

By clicking on the item numbers listed in the below mentioned tables, you will get a photometric data sheet in PDF format for the respective luminaire type.

T26 (T8) VVG induktiv / low loss ballast
TypAbdeckungAbmessungen*Gewicht
TypeDiffuserDimensions*Weight
PMPCLBHDKg
FA 1/18W70 400 00070 400 7006731021054501.6
FA 1/36W70 400 00170 400 70112831021056602.4
FA 1/58W70 400 00270 400 70215831021059003.2
FA 2/18W70 400 00370 400 7036731591094502.0
FA 2/36W70 400 00470 400 70412831591096603.7
FA 2/58W70 400 00570 400 70515831591099005.1
* mm
T26 (T8) EVG / electronic ballast / D (FF)
TypAbdeckungAbmessungen*Gewicht
TypeDiffuserDimensions*Weight
PMPCLBHDKg
FA 1/18W70 400 00670 400 7066731021054501.3
FA 1/36W70 400 00770 400 70712831021056602.1
FA 1/58W70 400 00870 400 70815831021059002.5
FA 2/18W70 400 00970 400 7096731591094501.7
FA 2/36W70 400 01070 400 71012831591096602.9
FA 2/58W70 400 01170 400 71115831591099003.4
* mm
T16 (T5) EVG / electronic ballast / D (FF)
TypAbdeckungAbmessungen*Gewicht
TypeDiffuserDimensions*Weight
PMPCLBHDKg
FA 1/14W 70 400 01270 400 6506731021054501.3
FA 1/24W70 400 01370 400 6516731021054501.3
FA 1/28W70 400 01470 400 65212831021056602.1
FA 1/54W70 400 01770 400 65312831021056602.1
FA 1/35W70 400 01570 400 65415831021059002.5
FA 1/49W70 400 01670 400 65515831021059002.5
FA 1/80W70 400 02470 400 65615831021059002.5
FA 2/14W 70 400 02570 400 6576731591094501.7
FA 2/24W70 400 01970 400 6586731591094501.7
FA 2/28W70 400 02670 400 65912831591096602.9
FA 2/54W70 400 02370 400 66012831591096602.9
FA 2/35W70 400 02770 400 66115831591099003.4
FA 2/49W70 400 02270 400 66215831591099003.4
FA 2/80W42 179 94142 179 94215831591099003.4
* mm