/*]]>*/
News
Company
Products
Product Overview
Product Search
Moisture-proof
FAD
FAD-C -30°C
FAD-H +60°C
FAC
FAC-T
FAC-C -40°C
FA
FA-T
Moisture-proof batten
Compact luminaires
Surface-mounted
Recessed
Special luminaires
Diffusers
Trunking system
Applications
Competence
Service
Quality management
Contact
FA
CE :: The CE-identification is performed by the manufacturer. The manufacturer, at the manufacturers own responsibility, hereby confirms conformity with the respective EC or EU directives. Conformity in accordance with the Low-voltage Directive and the EMV Directive (interference immunity, emitted interference) is the precondition for the CE-identification for our products.
ENEC :: The ENEC-Symbol is the European safety symbol for luminaires. The test regulations are determined by the European standard 60 598. The ENEC-Symbol is issued in combination with the identification number of a European test center (VDE = 10) This documents that the luminaires have been built and tested in "conformity with the standards" as per the Low-voltage Directive 73/23 EEC.
VDE :: Reiss standard luminaires are VDE-approved. They have the VDE-approval and are continuously tested in strictly stipulated quality controls. These controls are supervised by the VDE.
F :: All luminaires meet the F-conditions. In the event of faulty luminaire the fastening surfaces will not be hotter than 180°C. They may be mounted on inflammable building materials as described in DIN 4102 ignition point of at least 200°C (e.g. wood). Observe the installation instructions in order to avoid incorrect installation.
IP 65 :: dust-tight (no ingression of dust) and protected from jet water (from all directions).
IP 67 :: dust-tight (no ingression of dust) and protected from immersion (with details about pressure and time).

Durchgangs-Verdrahtung halogenfrei / Through-wiring halogen-free
TypArtikel Nr.
TypeItem no.
FA* - DV 36W 5 x 1.5 mm230 060 015
FA* - DV 36W 5 x 2.5 mm230 060 016
FA* - DV 58W 5 x 1.5 mm230 060 020
FA* - DV 58W 5 x 2.5 mm230 060 021
Montage-Set / Mounting set*
TypArtikel Nr.
TypeItem no.
FA* - Multi-Set70 424 825

*Quick mounting set for wall and ceiling or chain and catenary suspension.

Druckausgleichselement M12 / Pressure compensation unit M12
TypArtikel Nr.
TypeItem no.
KIT DAE M1204 926 631

Membranes allow for pressure compensation between the housings's inside and the ambient area, in order to avoid critical excessive and/or negative pressure caused by temperature fluctuations.