/*]]>*/
News
Company
Products
Product Overview
Product Search
Moisture-proof
FAD
FAD-C -30°C
FAD-H +60°C
FAC
FAC-T
FAC-C -40°C
FA
FA-T
Moisture-proof batten
Compact luminaires
Surface-mounted
Recessed
Special luminaires
Diffusers
Trunking system
Applications
Competence
Service
Quality management
Contact
FA-T
CE :: The CE-identification is performed by the manufacturer. The manufacturer, at the manufacturers own responsibility, hereby confirms conformity with the respective EC or EU directives. Conformity in accordance with the Low-voltage Directive and the EMV Directive (interference immunity, emitted interference) is the precondition for the CE-identification for our products.
ENEC :: The ENEC-Symbol is the European safety symbol for luminaires. The test regulations are determined by the European standard 60 598. The ENEC-Symbol is issued in combination with the identification number of a European test center (VDE = 10) This documents that the luminaires have been built and tested in "conformity with the standards" as per the Low-voltage Directive 73/23 EEC.
VDE :: Reiss standard luminaires are VDE-approved. They have the VDE-approval and are continuously tested in strictly stipulated quality controls. These controls are supervised by the VDE.
F :: All luminaires meet the F-conditions. In the event of faulty luminaire the fastening surfaces will not be hotter than 180°C. They may be mounted on inflammable building materials as described in DIN 4102 ignition point of at least 200°C (e.g. wood). Observe the installation instructions in order to avoid incorrect installation.
IP 65 :: dust-tight (no ingression of dust) and protected from jet water (from all directions).
IP 67 :: dust-tight (no ingression of dust) and protected from immersion (with details about pressure and time).
FA-T 1/36W PM clear
FA-T 2/36W PM clear
FA-T 1/36 PM clear
η 90%
— C0-C180
— C90-C270
FA-T 2/36 PM clear
η 86%
— C0-C180
— C90-C270

Technical description

Moisture-proof luminaire with diffuser: Body made of hardly flammable, fully transparent polycarbonate (PC). Non-ageing polyurethane foam gasket. White sheet steel reflector. No separate catches required thanks to integrated fastening mechanism. Diffuser made of UV-resistant, clear, thermoformed polymethylmethacrylate (PMMA). With automatic terminal. Halogen-free wiring.

Options

  • Emergency lighting
  • Dimmable (analogue, DALI or DSI)
  • Multiwatt versions
  • HF motion sensor
  • CorridorFUNCTION
  • For areas exposed to fire hazard, protection type D (FF)
  • Protection class II
  • Strain relief
  • 2-lamp body fitted with 1 lamp

Highlight

Approx. 18% indirect light component


Diffusers

PM diffuser clear

PM diffuser made of UV-resistant thermoformed polymethylmethacrylate (PMMA), clear. This diffuser boasts high translucency, surface hardness, resistance to weathering and ageing, and outstanding resistance to chemical influences.

Mounting method

  • Direct to ceiling or wall (vertical and horizontal)
  • With clip for ceiling installation
  • Pendant suspension
  • RTS trunking rail

» Only for indoor installations or protected outside areas.