ENEC :: The ENEC-Symbol is the European safety symbol for luminaires. The test regulations are determined by the European standard 60 598. The ENEC-Symbol is issued in combination with the identification number of a European test center (VDE = 10) This documents that the luminaires have been built and tested in "conformity with the standards" as per the Low-voltage Directive 2006/95/EC.
VDE :: Reiss standard luminaires are VDE-approved. They have the VDE-approval and are continuously tested in strictly stipulated quality controls. These controls are supervised by the VDE.
CE :: The CE-identification is performed by the manufacturer. The manufacturer, at the manufacturers own responsibility, hereby confirms conformity with the respective EC or EU directives. Conformity in accordance with the Low-voltage Directive and the EMV Directive (interference immunity, emitted interference) is the precondition for the CE-identification for our products.
Protection class I :: Luminaires of protection class I: The luminaire is designed for connection to a rotective conductor.Protection class I is not identified by a symbol. The symbol indicating the protective earth is often used. Unless specified otherwise, all luminaires by REISS at least comply with protection class I.
IP 65 :: dust-tight (no ingression of dust) and protected from jet water (from all directions).
IP 54 :: dustproof (ingression of dust not impossible) and protected from splash water (from all directions).
CL 260 PM
CL 360 PM
CL 360 LED 18W PM | η 100%
— C0-C180
— C90-C270
CL 260 2/9W PM | η 43%
— C0-C180
— C90-C270

Technical description

Compact luminaire with high protection: Circular design. Large and small dimensions. Body made of hardly flammable, white (PC). Protection degree IP65 thanks to non-ageing profiled joint made of rubber (EPDM). All-purpose gear tray made of galvanised sheet steel. No separate catches required thanks to integrated fastening mechanism. Opal diffuser made of polymethylmethacrylate (PMMA) or polycarbonate (PC). With automatic terminal. 2 cable entries. Completely halogen-free luminaire.

Suitable for ambient temperature:

  • -20°C to +35°C
  • -20°C to +30°C (for LED version)


Mounting method

Approved for indoor use or use in outdoor areas protected by a roof (see installation instructions).

  • Direct to ceiling or wall


Opal diffuser made of UV-resistant polymethylmethacrylate (PMMA). The material boasts high translucency, surface hardness, resistance to weathering and ageing, and outstanding resistance to chemical influences.

Opal diffuser made of UV-stabilized polycarbonate (PC) which is characterised by outstanding impact resistance and dimensional stability.